All About Digimaster 3 Digimaster iii original odometer correction

1.Digimaster 3 Review

2.Digimaster 3 Update

3.Digimaster 3 Best Price

4.Digimaster 3 Download_digimaster iii digimaster 3 use guide

5.Digimaster 3 Vehicle List

6.Digimaster 3 Video

7.Digimaster 3 odometer correction update EBOOT and kernel

8.Odometer tampering on used cars

9.YanHua DigiMaster 3 D3 Device not found error

10.Digiprog 3 and Digimaster 3 odometer correction Table comparison

2016.5 Digimaster 3 Digimaster iii original odometer correction Update Online No Tokens Limitation:

How MINI VCI cable for TOYOTA Techstream Customize Car Setting?

It’s a pity that seems many people don’t know MINI VCI cable for TOYOTA TIS Techstream can support Toyota car customization! How MINI VCI cable with Techstream customizes car setting? This blog will show you.

Take TOYOTA TIS Techstream V8.00.34 and 2013 Scion FR-S as an example. General speaking, different Techstream versions and car models have similar operations.

First, use Xhorse MINI VCI cable to connect computer (OS recommended: Windows XP 32bit) to the car OBD2 port. Start Techstream and depress the brake pedal and press the cars power button. It will pop up the VIN information.

Next, just click “Customize Setting”

And there is a customize function menu, you will see the settings you can customize

Then, each setting has many options, you can customize you own setting now.

Such as choose “Wireless Door Lock”, you can turn the wireless Autolock off, adjust the wireless buzzer volume, set the trunk unlock to a double tap instead of a long press, etc.

Choose “Warning”, you can shut off the passenger side seatbelt warning buzzer, etc.

Choose “Air Condition”, you can adjust temperature.

Choose “Illuminated Entry”, it will allow you change interior lighting and so on.

Choose “Light Control”, you can shut off DRL; adjust the sensitivity of the auto headlights to come on when it’s darker or lighter out.

Hope this blog is helpful and clear to you. The screenshots showing are just part of customization settings. why not give it a go to do more? This OEM MINI VCI cable is with TIS Techstream V10.30.029 and newest firmware V2.0.4, support IMMO Reset and Customization, VPW protocol.

It only cost you €24!

How to install Xhorse MINI VCI Toyota Techstream V10.10.018

Following are the new V10.10.018 Toyota Techstream software free download and step-by-step instruction guide provided. ToyotaTIS Techstream V10.10.018 software can be free downloaded here:

http://down.chinaautodiag.com/toyota-techstream-10.10.018.zip

O/S: Windows XP without any anti-virus software

Techstream cable:

MINI VCI 16-pin cable, MINI VCI 16-pin and 22-pin cable, Xhorse MVCIcable

How to install MINI VCI Toyota TIS Techstream 10.10.018?

1) Install Toyota Techstream-10.10.018.setup

Open and run MINI VCI 10.10.018 setup 

 

Select Language, click “Next”

Install software wizard, click “Next”

Accept license agreement, click “Next”

Click “Next” in Customer Identification program

Click “Install” when “Ready to install the Program” message prompts

Install Wizard is completed, press “Finish”

2)      Activate Toyota TIS Techstream

Go to C:Program FilesToyota DiagnosticsTechstreamEnvIT3System.ini

Change

TISFunction=1 to

TISFunction=0

Click Ok

Save

3) Install MVCI Driver 2.0.1

Open “MVCI Driver folder”

Install “Mini-VCI Driver for TOYOTA-CABLE 2.0.1”

Click “Next” then “Install”

Click “Finish” when driver is installed.

4)      Com port setting

Open “My computer”>> “Device Manager” >> “USB Serial PORT (COM4)”

Make sure COM port is set to COM4

5) Run MVCI firmware update tool

Open “MVCI Firmware Update Tool” on the desktop

Click on “Device info” button to check device information, SN, firmware version etc

6) Configure Techstream 10.10.018

Open “Techstream” software on the desktop

Click “NO” to ignore pop-up Java message

Click “Setup” Tab>> “Tecshtream Configuration”

Select “Europe” in Area Selection windows, click “Next”

Select Tecshtream software language: English, click “Next”

7) Connect MINI VCI cable

Plug the Xhorse MINI VCI cable into the Toyota diagnostic socket

Click “Connect to Vehicle” in main menu

Initializing USB communication

After good communication is built, complete your vehicle information

Select system and carry out diagnostic function

Nissan Consult Plus Programming Feedback

Post on the comparison between Nissan consult 3 plus and Nissan Consult 3, then Nissan Consult Plus Programming Feedback.

 

Consult 3 plus VS Nissan Consult 3:

Nissan Consult 3(VI1) and consult 3 plus (VI2)is totally different interface…

And consult 3 plus software can not use w/ old (VI1)…

Consult 3, latest version is V9.021.02 and Consult 3 plus latest version is V34.11..

Consult 3 uses VI1 and works with vehicle 1996 to 2011…

Consult 3 PLUS works with 1996 and current models

Nissan Consult Plus Programming Feedback:

1. I have a friend that bought a hard drive with v51 installed with assist and cal files included. I think they had to use Team Viewer to complete the installation. He has done lots of programming. He’s done several blank trans modules. I installed a used ecm in a 2012 Altima with smart key and he set it up for me. No smart card needed with his laptop. It wasn’t cheap but it didn’t take long to pay for itself. I don’t know who he got the hard drive from. My friend’s computer is running Win 7 32.

2. I have been able to program a blank pathfinder tcm.2009.

I do not have any cards, using version 51.11.

You do not need them to do blank programming, but I think will need to program or update.

This is the first time and worked perfect!!!

I got my Nissan VII from you and its working as expected.

I am using a Panasonic cf-01 (non Nissan approved) and its working flawless.

I just bought blank calibration from Nissan tech info, ($20.00 usd).

Please thanks and rep if this have helped!!!

working with windows 7 pro 64 bits.

3. I have Consult 4. It is ok,but it is just Consult 3 in different case. The Consult 3 Plus is supposed to be pretty good.

How to install VOLVO VOCOM 88890300 Tech Tool 2.03 software

Volvo Premium Tech Tool V2.03 software installation on Win 7:

1) Download all files, copy to usb-hdd.
2) Unzip Acronis Boot 2014.part1.rar (need win.rar 5.0 above version)
3) Burn Acronis Boot 2014.iso into CD Disc
4) Unzip Tech Tool 2.03.85 (With APCI+ Update!)_Final.part01.rar, password: E29A11A8EE81DD9D1606BD83BBA26559, will get Tech Tool 2.03.85 (With APCI+ Update!)_Final.tib
5) Insert acronic boot CD, boot laptop
6) Recovery -> choose Tech Tool 2.03.85 (With APCI+ Update!)_Final.tib-> recovery to laptop harddisk
7) Reboot PC, now you will get ptt2.03 with new win7 system , then go to install driver
8) Copy TechToolCoreDevelopmentContent.rar and VCADSProDevelopmentContent.rar to desktop
9) Send us Teamviewer ID password, our foreign engineer will active it
Do not update the new software, otherwise the software is damaged!!!

Please contact customer service if you need the software and activation service.

Vocom 88890300 Interface for Volvo Renault UD Mack Truck Diagnose Win7: